瑞士ideal-tek 2AXCFR.SA反叉自锁镊子2mm塑料平头ESD防静电

反叉自锁镊子在自然非操作状态下保持夹紧，施力捏住握柄张开尖头、松开自动夹紧并保持，适用于精密敏感元件夹持。此设计可避免人手用力过大导致损伤或过小夹不稳而造成的风险，还可以减轻操作疲劳。瑞士ideal-tek 2AXCFR.SA镊子尖部宽2.0mm x 0.5mm厚度，CF碳纤维材质塑料头具有低摩擦和自润滑性能，良好的热稳定性，ESD防静电安全，非常适合用来夹取敏感电子元件、芯片、玻璃和陶瓷基板等，非磁性不锈钢手柄，全长130mm。另有CP碳纤维增强PEEK聚醚醚酮材质尖头，其出色的耐化学品和耐腐蚀性能，用于清洁、化学溶剂环境、组装过程中处理元件，耐高温300℃，ESD安全，高硬度耐磨。

瑞士Ideal-tek SA塑料镊子头材质特性

1、Engineering plastic type CF工程塑料碳素树脂纤维

PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre 含30wt％碳纤维增强的PA66/CF30聚酰胺66

heat stabilized, very low coefficient of linear thermal expansion, good heat capability

热稳定，线性热膨胀系数非常低，良好的散热能力

very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance

极高的刚性，出色的拉伸和弯曲强度，抗疲劳和蠕变性能

low friction, self lubricating properties, excellent wear and abrasion resistance

低摩擦，自润滑性能，出色的耐磨性

good chemical resistance (oils, grease, fuels, non polar solvents); not resistant to strong acids, alkalis and hot water or steam

良好的耐化学性（机油，油脂，燃料，非极性溶剂）；不耐强酸、强碱和热水或蒸汽

ESD safe material, (avoids dust attraction, sparks generation,ignition sources)ESD防静电（避免尘埃，火花，点火源）

typical applications include handling of sensitive components and devices (electronic components, micro-mechanical parts, glass and ceramic substrates, capillary, etc.)

典型应用包括处理敏感组件和设备，如电子元件、芯片、微机械零件、玻璃和陶瓷基板、毛细管等

2、High-performance plastic type CP高性能塑料PEEK聚醚醚酮

PEEK/CF30 polyetheretherketone reinforced with 30 wt% carbon fibre

very hard, rigid, high tensile and flexural strength, very high wear resistance

high heat capability (260-300°C), good dimension stability, low thermal linear expansion coefficient

excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing

ESD safe material, low surface resistivity (105 Ohm)

typical applications include handling of components in cleaning/chemical/assembly processes also at high temperatures (soldering)

含30wt％的碳纤维增强的PEEK/CF30聚醚醚酮

非常坚硬，刚性，高抗拉强度和挠曲强度，非常高的耐磨性

高热容量（260-300°C），良好的尺寸稳定性，低的线性热膨胀系数

出色的耐化学品和耐腐蚀性能，出色的抗热老化性能

ESD安全材料，低表面电阻率（10^5欧姆）

典型应用包括清洁、化学溶剂环境、组装过程中处理元件，可在高温焊接下操作

Swiss Made瑞士ideal-tek可替换头镊子系列型号规格

idealtek镊子可替换塑料头规格说明书http://www.testeb.com/download/202002/ideal-tek_4WFCPR_5CFR_259CFR.pdf